For a 4-pole trailer wiring harness to go along with the Class II hitches made for your 2017 Subaru Outback Wagon, Draw-Tite # 36493 and Curt # C12136, you can use Tekonsha T-One Vehicle Wiring Harness # 118467.
This kit does include a powered taillight converter that draws power for the trailer lights directly from the battery to ensure that your vehicle wiring cannot be overloaded by power demands from the trailer. The converter is the small black box integrated into the harness.
You... view full answer...
The Yakima SkyBox cargo boxes, like the NX 18 Rooftop Cargo Box # Y45AV, will come with grease in the lock core housing according to my contact at Yakima.
She also did point out that the dry graphite lubricant is good to use on the external part of the lock core as well since it doesn't attract dust and dirt. view full answer...
To see a picture of what the red S clips that the installation instructions are referring to check out the picture I attached. If all you have is about 1 inch of extra cable you would be fine not using one of the clips to secure it away.
The purpose of the clip would be to secure extra cable back to the chain so that the excess wouldn't hit anything. But with only an inch of excess cable you would be just fine. view full answer...
The Replacement 3-Wing Hand Knob # 753-0745 that you referenced is sold individually. The one customer who had a bag of these delivered had ordered several of them. view full answer...
The Yakima SKS lock cores, # Y07202, includes the two lock cores, 2 regular keys that match the locks, and a change key to remove/install lock cores. I have included a link to a video that, in part, shows how it all works. The video is on a bike rack but the same process for installing the locks will apply to the cargo box. view full answer...
The Karrier ST205/75R14 Radial Trailer Tire w/ 14" White Wheel # AM32161 is not machine balanced - nor are any trailer tire and wheel combos.
That said, it will be ready to install when you receive it. What happens is the manufacturers line up the light spot on the tire with the heavy spot on the wheel, which is a type of balancing, although it is not the same as what happens with the tire on a passenger car.
While you can have the Karrier # AM32161 professionally balanced if you like,... view full answer...
The Yakima LongArm Bed and Roof Load Extender for 2" Hitches # Y01149-1150 simply includes the extender with a 60" crossbar, though you can add a lock and crossbar pad if you like.
For a pad you can use the Crossbar Pad for Yakima LongArm Load Extender # Y07417, and to lock the LongArm and help protect your investment you will need the Yakima HitchLock # Y07235
I have added a link to a video review for you to check out as well of the Yakima LongArm Bed and Roof Load Extender for 2" Hitches... view full answer...
Yep, it sure does; a stop collar to automatically align the hitch pin holes is indeed included with the 24x60 etrailer Cargo Carrier for 2" Hitches # e98874.
I have added a cut out below from the product page of the # e98874 which shows this. view full answer...
The Let's Go Aero TwinTube U-Build-It Slide-Out Hitch Rack # HMK901 referenced in your question does indeed come with an LED light kit along with a 4-Way harness that will plug right into a 4-Way on the vehicle. I actually went out to our warehouse and looked through the assembly to verify this. The red caps at the end of the base tubes are just reflectors like you mentioned but there are 2 additional LED lights that can be mounted to the unit as well. view full answer...
Trailer hitch # 76227 does not come with hardware because it uses nuts already on the 2017 Subaru Outback Wagon. The bumper beam on this vehicle fits over 8 studs in the vehicle frame and is held there with 8 matching nuts. This hitch will be sandwiched between the bumper beam and the end plate where it mounts using the same studs and nuts. I have linked the instructions for you to illustrate this.
The review you mentioned is actually referring to EcoHitch # 306-X7601 which comes with... view full answer...
The EcoHitch # EH34FR doesn't provide an integral bracket for installing a 7-way trailer connector. We offer bracket mounts that usually work pretty well, which will use a pipe clamp to attach to the hitch crossbar, but because the crossbar will be buried behind the bumper cover once the installation is complete, that wouldn't be a good option in this case.
The Curt # C58000 Easy Mount bracket would be your best bet. view full answer...
I have a solution for you. While the Rola Roof Cargo Basket - Steel - 73-1/4" Long x 40-1/2" Wide x 5" Deep - 180 lbs (model 59504 with the 59505 extension) includes all the hardware needed for installation, you will need a roof rack system with crossbars on your 2020 Subaru Outback Wagon in order to use the basket. If you need a roof rack system that will fit the Rola Roof Cargo basket, the compatible parts depend on if you have factory flush rails or factory raised rails.
For a compatible... view full answer...
The # ETBC7 or # ETBC7L will differ from the Curt # C57672 in that these two parts both come with all of the wiring, breakers, mounting bracket and connectors needed to complete the job; the Curt # C57672 is just the 7 way connector without any of the wiring, breakers or the mounting bracket. Other that than, both connectors are the same. view full answer...
The HandRoll Carrier # Y04082 that you referenced is actually just the part of the carrier that has the wheels. To complete the carrier you also need some saddles like the DeckHand # Y04083. This combination is available for your 2019 Subaru Outback Wagon in the kit # Y04083-04082 and is compatible with round, square, or aero-style crossbars.
To add locks to either setup you need the 4 lock core set # Y07204. view full answer...
The Curt # C67JR weighs 31 lbs, so it's not impossible to manage on your own with some jack stands or some other manner of propping the jack up while you bolt it into place.
I have linked the written instructions for you to take a look at. view full answer...
The Dexter Nev-R-Adjust Electric Trailer Brake Assembly Kit part # K23-478-479 or part # K23-478-00 for left and part # K23-479-00 for right does not come with a hub/drum. If this is needed you can use the Dexter Trailer Hub and Drum Assembly part # 84546UC3-EZ as most 4,400 b axles use 3,500 lb hubs/drums. view full answer...
The Curt Trailer Hitch Receiver part # 13390 comes with everything you will need for installation except the tools including 4 carriage bolts, 4 hole spacers, 4 hex nuts, and 2 firewire bolt leaders. In order to install this hitch you will need a 10/19 mm socket, 8" extension, ratchet, torque wrench, 17/32" drill bit, rotary tool, and file.
If you will be doing any towing with the hitch then you will also need a wiring harness, ball mount, and hitch ball. For a wiring harness I recommend... view full answer...
There are 2 Curt trailer hitch receivers that fit your 2018 Subaru Outback; the Class II, part # C12136 and the Class III, part # C13206. Both require the fishwire technique for installation and both also include 2 fishwires for this.
I've also attached install videos and the install details of both hitches. view full answer...
We can piece together a Malone Lowbed trailer by first starting with the part # MPG464-LB and then a single bunk kit part # MPG561 and then the spare kit part # MPG465 and you'd be set. There isn't a kit with just the parts you are looking for available at this time. view full answer...
Tire and wheel combos we carry, like the Kenda 4.80/4.00-8 Bias Trailer Tire with 8" Galvanized Wheel # AM30070 you're asking about, don't come balanced since trailer tires don't need to be balanced.
If you'd like for them to be balanced you can either use the Counteract Tire Balancing Beads for Tandem Axle Trailers # CA68VR or you can have a shop balance the tires for you. view full answer...
Go To Results